Install the miredo package:
$ sudo apt-get install miredo
After this command, you should see an IPv6 address beginning with "2001:0:" in your network settings (use 'ifconfig'). If so, you're connected to the IPv6 world.
Remove miredo system startup links:
$ sudo update-rc.d -f miredo remove
Usage:
$ sudo /etc/init.d/miredo {start|stop|restart|reload|force-reload}
If miredo is running you should have another interface called "teredo".
You can display it with the following command:
$ ifconfig teredo
To test if you can reach the IPv6 network, try the following:
carnal0wnage ~: ping6 ipv6.google.com PING ipv6.google.com(iw-in-x63.1e100.net) 56 data bytes 64 bytes from iw-in-x63.1e100.net: icmp_seq=1 ttl=55 time=284 ms 64 bytes from iw-in-x63.1e100.net: icmp_seq=4 ttl=55 time=100 ms 64 bytes from iw-in-x63.1e100.net: icmp_seq=5 ttl=55 time=108 ms --- ipv6.google.com ping statistics --- 7 packets transmitted, 3 received, 57% packet loss, time 6000ms rtt min/avg/max/mdev = 100.005/164.009/284.016/84.920 m
carnal0wnage ~: ping6 www.ipv6.org PING www.ipv6.org(igloo.stacken.kth.se) 56 data bytes 64 bytes from igloo.stacken.kth.se: icmp_seq=1 ttl=58 time=472 ms 64 bytes from igloo.stacken.kth.se: icmp_seq=2 ttl=58 time=156 ms 64 bytes from igloo.stacken.kth.se: icmp_seq=3 ttl=58 time=156 ms 64 bytes from igloo.stacken.kth.se: icmp_seq=5 ttl=58 time=156 ms 64 bytes from igloo.stacken.kth.se: icmp_seq=6 ttl=58 time=156 ms --- www.ipv6.org ping statistics --- 7 packets transmitted, 5 received, 28% packet loss, time 6000ms rtt min/avg/max/mdev = 156.009/219.212/472.027/126.408 ms
carnal0wnage ~: traceroute6 www.ipv6.org traceroute to www.ipv6.org (2001:6b0:1:ea:202:a5ff:fecd:13a6), 30 hops max, 40 byte packets 1 * * * 2 terminator.csbnet.se (2a02:9a0:0:1::193) 612.035 ms 612.035 ms 612.035 ms 3 c2sth-ge-5-0-8.sunet.se (2001:6b0:dead:beef:2::3a9) 648.037 ms 648.037 ms 648.037 ms 4 a1sth-kth.sunet.se (2001:6b0:dead:beef:2::2c6) 636.036 ms 636.036 ms 636.036 ms 5 2001:6b0:1:1d20::2 (2001:6b0:1:1d20::2) 736.042 ms 736.042 ms * 6 * 2001:6b0:1:1200::3 (2001:6b0:1:1200::3) 324.018 ms 324.018 ms 7 igloo.stacken.kth.se (2001:6b0:1:ea:202:a5ff:fecd:13a6) 160.009 ms 156.009 ms 156.009 ms
Changing teredo server:
sudo vi /etc/miredo.conf ServerAddress teredo.ipv6.microsoft.com sudo /etc/init.d/miredo restart
Windows XP
Install
Open the Terminal with Start -> Run -> cmd
netsh interface ipv6 install netsh interface ipv6 set teredo client
Uninstall
netsh interface ipv6 uninstall
Vista
Install
IPV6 and Teredo is enabled per default. You can get into the settings by going into the preferences for an network interface. "Obtain an IPv6 address automatically" should do the trick.
Uninstall
Add this registry value ("DWORD") set to 0xFF (long line, double-click, and copy):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
Or save the two lines in a .reg file and double-click it:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters] "DisabledComponents"=dword:000000ff
You can also go to the interface properties of an network interface and deselect the IPv6 protocol for that interface. To enable IPv6 again, replace dword:000000ff above with dword:00000000.
Ref:
http://pugio.net/2007/07/howto-enable-ipv6-the-teredo-w.html
https://blueimp.net/linux/howto/ipv6-teredo.html
