when i get to using aireplay-ng i get the error " WLAN0 is on channel 11, but the AP uses channel 13"
ive traced this error back to a driver issue the drivers built into bt4 are the US version and they only have 11 wifi channels here in the UK we use channel 13 all the time for some reason ( mainly as BT defaults to that on their equipment they give free with the broadband)
anyway i thought i had found the fix to this Quote:
|
The key piece to sorting this out was adding this line to my /etc/modprobe.d/options and then re-starting my system (simple - brute force!): options cfg80211 ieee80211_regdom="EU" "iwlist wlan0 channel" previously only reported channels 1 to 11, but now shows all of them. No problems connecting to the AP now on channel 13: steve@steve-laptop:~$ iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz ( blah blah blah blah ) Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency=2.472 GHz (Channel 13) |
what am i doing wrong does anyone know ?? has anyone done this before to get to use channel 13 ?
thanks for your replies please keep them simple i am a total noob
oh forgot to add in windows both these cards work fine in the EU channel bands ..
thought i spotted a mistake as the "EU" is in quotes in his text and i found the same instructions elsewhere without the quotes round the EU and you can also use JP but no its still only does 1-11