jetlib.sec » Tags » hexapod

Over at Mad Lab Industries, they had the idea of building a quadcopter that could walk and fly. By combining a hexapod with a hexacopter, they ended up with this creation. The hexapod part started off with PhantomX Hexapod Kit, but it was far too heavy to fly. To reduce weight, they manufactured carbon fibre parts [...]

Tags:  hexacopter mad hexapod mad-lab carbon-fibre fly robots hacks  

ODEX-1 is called the first commercial walking robot in this video from 1983. Of course you will quickly recognize this as a hexapod. It’s hard to get over the fact that what was so advanced at the time can now be built at home relatively inexpensively. As with most of these retrotectacular posts the presentation is a [...]

Tags:  retrotechtacular robot odex walking-robot hexapod robots hacks  

This all-mechanical hexapod (translated) was meticulously planned and beautifully constructed. It’s not craning its neck to see what’s ahead. That’s a smoke stack for the steam engine which propels the machine. Mechanically the legs were the hardest part. That’s only because the steam engine was not built from scratch. It’s a Wilesco D14 which is powered [...]

Tags:  steam hexapod engine smoke-stack steam-engine d14 robots hacks  

  It may not be as cool as a bear riding a jet ski on a shark in outer space, but Stompy, the giant, rideable walking hexapod comes very close. A few months ago, we caught wind of a gigantic rideable hexapod project brewing at the Artisan’s Asylum hackerspace in Somerville, MA. The goal was to [...]

Tags:  hexapod stompy sack jet-ski kickstarter  

Although not the biggest hexapod walker we’ve seen by any means, this one is nonetheless worth a mention. Made with windshield wiper motors, PVC pipe, and lots of wood, it’s still a good size ‘bot. It’s a work in progress, but check out the video of it’s legs being tested as well as one of [...]

Tags:  pvc pipe hexapod wood windshield-wiper-motors pvc-pipe robots hacks  

I’ve always loved hexapods. Unfortunately, the cost to play with them can be rather daunting. Hexy is seeking to make a decent impact on that by being only $200. Yep, that $200 includes everything but the computer. You get the entire chassis, micro controller, servos, sensors, batteries, etc. I ran into [Joe] from arcbotics showing [...]

Tags:  hexapod hexy makerfaire joe k.c hexapod-project micro-controller robots hacks  

[Balline] really wanted to play with a hexapod but found the cost to be prohibitive. Being a mechanical engineer, he was able to fairly quickly come up with a stable 3 servo design that would allow him to experiment with the platform. He chose to use wood as the construction material to help reduce costs [...]

Tags:  hexapod frame balline servo-design mechanical-engineer construction-material robots hacks  

Here’s a lesson in doing a lot with very little. [Oldrobot] built this hexapod using cardboard for most of the pieces. He still had the box from his vacuum clear and it just happened to have a large black area the makes the top of the beetle look like it’s been painted. The control board [...]

Tags:  hexapod cardboard lesson vacuum robots hacks  

[Zenta] has been building his MorpHex rolling hexapod for nearly a year now, and good things come to those who wait. After a ton of development and fabrication, [Zenta] finally has his mechanical jellyfish robot rolling and walking around. This isn’t the first time we’ve seen [Zenta]‘s MorpHex robot in action. A year ago, we saw the [...]

Tags:  zenta robot morphex hexapod jellyfish robots hacks  

Hexapod robots seem to be a dime a dozen lately, but we think you will be hard pressed to not be wowed by [Zenta’s] latest creation. He’s built a bunch of hex and octopods before, but hasn’t tried building anything quite like this. His MorpHex bot might look like your standard hexapod, but once it [...]

Tags:  hexapod morphing dime hexapod-robots octopods morphex robots hacks  

Although hexapod robots have been featured on [HAD] many times, this one features a really cool minimalistic design. With few mechanical parts to support the three servos, the “Earthcore Hexapod Robot” has a unique gait, tending to quickly slide the driving legs rather than picking the whole robot up. Although it would probably have trouble [...]

Tags:  hexapod robot earthcore hexapod-robots minimalistic-design servos robots hacks  

  [Rob] built this hexapod one day when he had some free time after work. Just like the last hexapod we saw, he based the build on the Pololu design which uses three servo motors for surprisingly reliable movement. The hardware is very straight forward. A Dorkboard serves as the brain. It’s a PCB that is wider [...]

Tags:  day hexapod obstacle rob pololu dorkboard robots hacks  

Here’s a fantastic project that lets to drive a hexapod around the room using an RC controller. [YT2095] built the bot after replacing the servo motors on his robot arm during an upgrade. The three cheapies he had left over were just begging for a new project, and he says he got the first proof-of-concept [...]

Tags:  controller hexapod project robot-arm proof-of-concept robots hacks  

Here’s a small but functional hexapod that is controlled via Bluetooth. [Sigfpe] started with the hexapod kit sold by Polulu and added a BlueSMiRF modem to get the little guy’s communications up and running. But since the bot is merely three servos, a microcontroller board, sensors, and miscellaneous parts it’s an easy build for most [...]

Tags:  hexapod jittering bluetooth board-sensors microcontroller-board s-communications robots hacks  

The latest robot out of Nolebotic is Al.I.S.E, or Aluminum, Infrared Scanning Entity. Don’t let the name fool you, its a pretty simple take on the classic hexapod walking platform using a crank arm and leavers made into the legs. The body of the robot is made out of aluminum which is pretty easy to [...]

Tags:  robot aluminum hexapod don i.s.e crank-arm leavers robots hacks  

Prospero is the working prototype of an Autonomous Micro Planter, which is intended to be unleashed as a swarm. Using a Parallax propeller mounted on a Lynxmotion AH3-R hexapod body, though we have a ton of different ideas on hexapods if you find the price of the body to be out of budget. Inputs to [...]

Tags:  prospero farmbot body hexapods lynxmotion hexapod robots hacks  

[JC] built himself a hexapod based on a project he found on the Internet. It worked fairly well, but was mechanically weak and prone to breakage. He set out to improve the design and came up with the unit seen above. It uses three servo motors to control the six legs, and walks quite well [...]

Tags:  design hexapod project legs robots hacks  

This video is a blatant example of having too many high-end toys but we love it anyway. [Robert Stephenson] is controlling a rather awesome-looking hexapod via a Bluetooth connection to his HTC Hero. The app allows on-screen selections to decide which portion of the robot will move as a result of accelerometer data from the [...]

Tags:  hexapod android iphone robert-stephenson hero blatant-example accelerometer hacks  

ATHLETE, or the All Terrain Hex-Limbed Extra Terrestrial Explorer, looks pretty cool. This Hexapod is actually a pair of 3 legged robots that have joined together to haul some cargo off the top of stationary module. While this time-lapse shows it going pretty slowly, you get a hint at the end that it isn’t required [...]

Tags:  athlete insect rover giant-insect legged-robots hexapod robots hacks  

This tip was submitted by [Mike], with the original information seen in this post. When I passed the story along to our writer [Mike Szczys] I didn’t send along the entire email conversation. This bot is noteworthy because it has taught itself to walk. In the build log you can learn about how it has [...]

Tags:  hexapod clarification dexterous mike mike-szczys robots hacks  

[Matt Bunting's] hexapod caught Intel’s eye (and their wallet). This coordinated little bot runs Ubuntu on an Atom Z530 processor, popular in netbooks like the Dell Mini 10, and uses a webcam to coordinate and monitor its motion. Intel picked up two of them from [Matt] to exhibit at trade shows. As you can see, [...]

Tags:  processor hexapod atom matt-bunting dell-mini matt netbooks bunting wallet robots hacks  

[Daniel's] horrifying hexapod makes us wish we were sitting next to a laser cutter. The parts are cut from 4.9mm plywood and include laser-sculpted sections to allow the twenty servos to properly seat in their mounting spaces. We would suggest that you build it in secret so as not to ruin the surprise when your [...]

Tags:  laser spiderbot envy daniel laser-cutter hexapod servos robots hacks