jetlib.sec » Tags » stepper

You probably know that if you spin a motor (mechanically) it generates electricity on what would normally be the inputs. This can be a problem when you shut off a spinning motor and is the reason that protection diodes are built into motor driver circuits. But [Dino] isn’t interested in driving a motor, he wanted [...]

Tags:  electricity motor stepper dino driver-circuits stepper-motor diodes classic hacks  

Stepper motors are pretty easy to control with a microcontroller. But if you’re looking to run then at a high number of revolutions per second things get tricky pretty quickly. [Uwe's] been learning about and building stepper drivers for years, and recently he decided to build a high-performance driver based on a MicroChip reference design. [...]

Tags:  speed microcontroller stepper uwe performance-driver reference-design microcontrollers  

If you’ve been reading Hack a Day for long enough, you know about our infatuation with stepper motors. These precious little devices put the oomph into our CNC routers, 3D printers, robots, and other miscellaneous projects. Steppers aren’t your run-of-the-mill motors, though. [Steaky] posted a great introduction to stepper motors that lets you hit the [...]

Tags:  introduction hack stepper cnc-routers stepper-motors oomph how-to  

[TBJ] is building what he calls a junkbox 3D printer. You can probably guess that he’s trying to salvage most of the parts for the device, and after pulling a stepper motor from an old printer he was in need of a way to control it. What he came up with is a stepper driver [...]

Tags:  printer driver stepper stepper-driver junkbox tbj cnc hacks  

Broadcast TV has come a long way from adjusting the rabbit ears on top of the set just to get a fuzzy black and white picture. While nowadays there are often HD signals broadcast in most areas, it can often still be critical to redirect an antenna to get the best possible signal. By harvesting [...]

Tags:  stepper broadcast antenna hdtv-antenna rabbit-ears broadcast-tv radio hacks  

[Stefan] sent in this project writeup to show us how he used a stepper motor as a rotary encoder. Using a stepper motor as an encoder isn’t really that new, as [Stefan] points out, we’ve seen it several times before. He wanted to use this in the quickest simplest way with his computer though. Instead [...]

Tags:  encoder motor stepper stefan rotary-encoder stepper-motor soundcard peripherals hacks